A carefully comparative study of several ceramics compounds allowed the identification of MoSi2 blended with Si3N4 as a suitable material for the realization of bushing nozzles, specifically designed for basalt fibers ...
Angelini, Francesco; Di Frischia, Stefano; Colao, Francesco; Palucci, Antonio(ENEA, 2017-06)
This document describes the implementation process of a source apportionment modeling chain for quantifying emissions coming from industrial sources. The scheme is outlined in EN UNI 15445 and documented in literature, ...
Colao, Francesco; Di Frischia, Stefano(ENEA, 2017-06)
In the frame of the Italian the RITMARE program, ENEA has supported the development of a web information system for the acquisition, management, analysis and reporting of LIDAR data collected during oceanographic campaigns. ...
Construction industry consumes around 40% of all extracted natural resources, produces large amount of waste from building demolition and it is highly energy consuming. Several approaches have been carried
out to mitigate ...
Arleo, Giuseppe; Bernardo, Franco; Cuccarese, Maria; Alba, Maria Bruna; De Fazio, Piero(Wichtig Publishing, 2016-07-26)
Use of fiber reinforced composite in the production process and major applications could be much more rapid knowing the trend of their mechanical properties degradation due to aging caused by environmental
conditions, ...
Alba, Maria Bruna; Colucci, Pietro; De Fazio, Piero; Feo, Andrea; Invernizzi, Roberto(2012-06-24)
This article provides the first results of qualification and control tests over BFRP conducted at the material Laboratory of the ENEA Trisaia Research Center, in collaboration with HG GBF, a Chines company specialized ...
Alba, Maria Bruna; Arleo, Giuseppe; Bernardo, Franco; De Fazio, Piero(2015-07-19)
Use of multi-material systems based on fiber-reinforced composites and metal inserts, for instance in many structural components, can lead to numerous technical advantages such as a weight reduction of 40% in the case of ...
This paper aims to verify performance of a measuring deformation technique based by optical fibers sensors (FBG) applied to fiber-reinforced concrete product destined to operate in a marine environment. A first step of ...
Ti-6Al-4V is an alloy increasingly used in aeronautics due to its high mechanical properties coupled with lightness. An effective technology used to manufacture titanium components with a reduced buy-to-fly ratio is laser ...
This paper deals with the implementation of a research infrastructure as a sensor network for urban air quality monitoring. It is based on distributed devices (sensor-nodes) for measuring air pollutants such as toxic gases ...
This paper presents an experiment conducted using machine learning techniques, in particular a support vector machine (SVM) machine in analyzing the results of a dataset from a qualitative survey on energy efficiency in ...
The problems associated with the handling of planet resources, development and sustainability are far from being understood from the quantitative point of view. The emergence of models, employing concepts from Ecology, ...
The polymeric reinforced composite materials (FRPs), used in various application fields, combine the high strength and stiffness of the fibers with the typical properties of polymer matrices (formability, impact resistance ...
In nuclear power plants the detection of leakages from the primary cooling circuit in the secondary circuit is considered of the utmost importance to early detect and correct any developing deviation from normal operation. ...
In the triennium 2012-2014, ports and marinas, as well as a marine protected area (MPA), along the costs of Albania and Apulia (Italy) were monitored, in the framework of the CARISMA project (characterization and ecological ...